Square Footage Calculator

Every flooring job starts with the same question, how much do I actually need to buy, and it is really three questions wearing one coat. First the bare area: length times width for a rectangle, pi times the radius squared for a round space, half the base times the height for a triangle. Then the waste allowance, because cuts, mistakes and damaged boards are a fact of every install, and installers typically add 5% to 15% on top of the measured area. Then the part most simple area calculators skip entirely: flooring is not sold by the square foot, it is sold by the box, so the honest final answer is a whole number of boxes, rounded up from the with-waste total using the coverage printed on the box you are buying. This free calculator does all three steps for rectangles, circles and triangles, multiplies repeated identical areas for you, and converts the order quantity into square yards and square metres for products priced that way. The guide below covers measuring odd-shaped rooms, choosing a waste percentage that matches your layout, and why the box count must always run on the area after waste, never before it.

Last updated: November 14, 2026

Shape of the area

ft For a rectangle, measure the longest wall in feet, decimals allowed (12.5 for 12 ft 6 in). Round areas and entryways are measured with the circle and triangle shapes instead.

ft

ft For a circle, the radius is half the full width across: a round area 10 ft across has a radius of 5 ft. Only used when the shape is set to Circle.

ft For a triangle, the length of the side you measure the height from. Only used when the shape is set to Triangle.

ft For a triangle, the straight-line distance from the base to the opposite corner, at a right angle to the base, not the length of a sloped side.

How many areas of exactly this size you are covering: two matching bedrooms, three identical closets, and so on. Odd-shaped extra spaces are better run as their own calculation and added.

% Extra material for cuts, mistakes and damaged boards. Flooring installers typically add 5% to 15%: about 10% for a straight layout in a simple room, nearer 15% for diagonal patterns and rooms with many corners.

sq ft The square feet one box covers, printed on the box itself. When this is above 0 the result adds the boxes you need, rounded up from the with-waste total. Set it to 0 to skip the box count.

The formula

  • Rectangle area = length x width; circle area = pi x radius squared; triangle area = base x height / 2
  • Total area = area of one shape x number of identical areas
  • Total to order = total area x (1 + waste allowance / 100)
  • Square yards = square feet / 9; square metres = square feet x 0.09290304
  • Boxes needed = total to order / coverage per box, rounded up to the next whole box

A worked example

A rectangular room 12 ft long by 15 ft wide has an area of 12 x 15, which is 180 sq ft. With the standard 10% waste allowance the order quantity is 180 x 1.10, which is 198 sq ft, equal to 22.00 sq yards or 18.39 sq metres. If the flooring you chose covers 20 sq ft per box, the box count is 198 / 20, which is 9.9, rounded up to 10 boxes, and those 10 boxes cover 200 sq ft, leaving a small margin for cuts and a future repair board or two.

More about the Square Footage Calculator

Three shapes cover almost every floor

Most floors, however irregular they look, break down into three shapes. Rectangles do the heavy lifting: bedrooms, living rooms, hallways and kitchens are length times width. Circles turn up more often than people expect, in round entryways, curved bay areas, circular rugs of inlaid board and the footprint of a round feature you are flooring around or under. A circle is pi times the radius squared, and the only measurement you need is the radius, half the distance straight across. A 10 ft round area has a radius of 5 ft and an area of about 78.54 sq ft, noticeably less than the 100 sq ft a careless length-times-width guess would give, because the corners of that imaginary square do not exist.

Triangles handle the wedges: the angled end of a room under a staircase, a diagonal wall that cuts a corner off a rectangle, a triangular closet. Base times height divided by two, with the height measured square to the base. When a room mixes shapes, calculate each piece on its own and add the results; this calculator's count field handles identical repeats, and separate runs handle one-off pieces. Splitting honestly into shapes is the whole skill of measuring, and it beats any single clever measurement of a complicated outline.

Waste allowance: the percentage that saves the job

The measured area is what ends up on the floor. It is not what you need to buy. Every row of boards ends in a cut, some boards arrive damaged or get miscut, patterned layouts throw away offcuts that cannot be reused, and installers consistently work to an allowance of 5% to 15% over the measured area. Ten percent is the standard planning figure for a straight layout in a simple rectangular room, and it is the default in this calculator. Diagonal layouts, herringbone and other patterns, large-format planks and rooms chopped up by closets and fixtures belong at 15%. A very simple room with long straight runs can justify 5%, but it is the floor of the sensible range, not the norm.

Skipping the allowance is the classic false economy. The saving on a mid-size room is a fraction of one box, while running short costs a second trip, a possible minimum-order or delivery fee, and the real risk that the replacement box comes from a different production run with a shade that is close but visibly not the same, in the middle of your floor, forever. The leftovers from a correct allowance are not wasted either: a board or two kept in a closet is the only reliable way to repair damage years later, when the product line may no longer exist.

Layout Suggested waste allowance Why
Straight rows, simple rectangle 10% End cuts and the odd damaged board
Straight rows, very simple long room 5% Fewer cuts per square foot
Diagonal layout 15% Angled cuts at every wall waste more
Herringbone or complex pattern 15% Pattern offcuts rarely reusable
Many closets, corners and fixtures 15% Cuts multiply around obstacles

Boxes: why the count runs on the with-waste total

Flooring is manufactured, shipped and sold by the box, and the box is the smallest unit of money in the job. That single fact decides the order of operations: measure the area, add the waste allowance to get the order quantity, divide by the coverage printed on the box, and round up, always up, because a result of 9.9 boxes still leaves you a tenth of a box short of finishing. Rounding down is not thrift; it is scheduling a second purchase. The coverage those boxes give you will exceed your order quantity slightly, and that small surplus is your cutting stock and repair reserve, not an error.

Box coverage itself needs respect. It is set by the manufacturer for that exact product, it differs between laminate, vinyl plank, engineered and solid hardwood, and it can change between production runs of the same product name. Around 20 sq ft per box is common for plank products, but common is not a specification. Read the figure off the box or the retailer's listing for the precise product you are buying and enter that. A box count built on a guessed coverage figure is a guess with extra steps.

Measuring so the number can be trusted

Measure in feet and decimals, and measure at the longest points. Walls bow, rooms taper, and a room that is 12 ft at one end and 12 ft 4 in at the other needs flooring for the bigger figure across its whole width, so take the maximum of two or three measurements per direction. Convert inches to decimals by dividing by 12: 6 in is 0.5 ft, 3 in is 0.25 ft. Include every surface the flooring will actually cover: inside closets that get the same floor, the alcove behind a door swing, and the strip under appliances that pull out.

Sketch the room before you measure it. A simple plan with the shapes marked, rectangle here, triangle there, closet as its own small rectangle, catches the two classic errors: forgetting a connected space entirely, and double-counting an overlap where two measured rectangles share a corner region. If two people can measure, one reading and one writing, numbers stop transposing themselves. The calculator will do flawless arithmetic on whatever you give it, which is exactly why the measuring deserves the care.

Square yards and square metres without tears

Two conversions cover the rest of the flooring world. Square yards: divide square feet by 9. Carpet and some sheet goods are still priced by the square yard in the United States, so a quote in yards and a measurement in feet meet through that one division, applied to the with-waste total. Square metres: multiply square feet by 0.09290304. Flooring across Canada, the UK and Australia is frequently specified and boxed in metric, and this calculator shows the with-waste total in both units on every run so a metric box label and an imperial room measurement can be reconciled in one sitting.

The trap to avoid is mixing the systems inside the box count. If the box states coverage in square metres, convert that coverage into square feet, by dividing by 0.09290304, and enter the converted figure, rather than dividing a square-foot total by a square-metre coverage. Unit mistakes do not produce slightly wrong answers; they produce answers wrong by a factor of about eleven, which is the difference between one box and a pallet.

Worked example: a triangular wedge under the stairs

Suppose you are flooring a triangular wedge under a staircase with a base of 10 ft and a height of 8 ft, measured square to the base. The area is base x height / 2, which is 10 x 8 / 2, exactly 40 sq ft. That is the bare area that ends up covered, before any allowance.

Add the standard 10% waste allowance and the order quantity becomes 40 x 1.10, which is 44 sq ft. If the flooring you chose covers 20 sq ft per box, the box count is 44 / 20, which is 2.2, rounded up to 3 boxes. Those 3 boxes cover 60 sq ft, leaving cutting stock and a repair board or two in reserve.

The takeaway is that the order of operations matters more than the shape: measure the area honestly, add waste second, and run the box count on the with-waste total last, never on the bare 40 sq ft, which would have suggested 2 boxes and left the job short.

How to use the Square Footage Calculator

  1. Pick the shape that matches your area: rectangle for most rooms, circle for a round space, triangle for a wedge or angled corner.
  2. Enter the measurements in feet for that shape, length and width, the radius, or the base and height. Decimals are fine, so 12.5 works for 12 ft 6 in.
  3. Set the number of identical areas if the same size repeats, matching bedrooms or closets, for example.
  4. Set your waste allowance, 10% is the standard starting point, and add the coverage printed on your flooring box if you want the box count.
  5. Press Calculate to see the total area, the order quantity with waste in square feet, yards and metres, and the boxes to buy.

Frequently asked questions

How do I calculate the square footage of a room?

For a rectangular room, measure the length and the width in feet at the longest points and multiply them: a 12 ft by 15 ft room is 180 sq ft. Measure into closets, alcoves and doorways you plan to cover, and when walls are not perfectly square, which is common, the longest measurement keeps you safe. For anything you plan to buy, add a waste allowance on top of the bare area rather than ordering the exact figure.

How much extra flooring should I order for waste?

Flooring installers typically add 5% to 15%. Around 10% suits a straight layout in a simple rectangular room. Move toward 15% for diagonal or patterned layouts, large-format boards, and rooms with many corners, closets and fixtures, because every cut throws away material. Very simple rooms with long straight runs can get away with 5%. Running short mid-install is the expensive mistake, since a later box may come from a different production run with a slightly different shade.

How many boxes of flooring do I need?

Take the order quantity, which is your total area plus the waste allowance, and divide it by the coverage printed on the box, then round up to the next whole box. A 180 sq ft room at 10% waste needs 198 sq ft of material; at 20 sq ft per box that is 9.9, so you buy 10 boxes. Flooring is only sold in whole boxes, so rounding down to save one box is how installs run out one board from the end.

How do I calculate square footage for a round room?

Use the circle formula: pi times the radius squared. The radius is half the full width across the space, so a round area 10 ft across has a radius of 5 ft, and its area is pi x 25, about 78.54 sq ft. Set the shape to Circle in this calculator and enter the radius. The same waste and box steps then apply, and round features usually deserve the higher end of the waste range because curved cuts waste more material.

How do I calculate square footage for a triangular area?

Multiply the base by the height and halve the result. The height is the straight-line distance from the base to the opposite corner, measured at a right angle to the base, not the length of a sloped side, which is the mistake that inflates triangular areas. A triangle with a 10 ft base and an 8 ft height is 10 x 8 / 2, which is 40 sq ft. Set the shape to Triangle and the calculator applies the same waste allowance and box count.

How do I convert square feet to square yards?

Divide by 9, because one square yard is a 3 ft by 3 ft square, which is 9 sq ft. The order quantity in the worked example, 198 sq ft, is exactly 22.00 sq yards. Carpet and some sheet flooring are priced by the square yard, while plank, laminate and hardwood are usually priced by the square foot or the box, so convert the with-waste total rather than the bare room area when you compare prices across the two systems.

How do I convert square feet to square metres?

Multiply by 0.09290304, the exact conversion. The 198 sq ft order quantity in the worked example becomes 18.39 sq metres. Flooring sold in Canada, the UK and Australia is often labelled in square metres per box, so if your box states its coverage in metres, convert the box coverage to square feet first, coverage in sq metres divided by 0.09290304, and enter that figure so the box count stays honest.

What does box coverage mean on a box of flooring?

It is the floor area the boards in that one box will cover, printed on the packaging by the manufacturer. It varies widely by product: many laminate and vinyl plank boxes cover somewhere around 20 sq ft, hardwood boxes are often a little smaller, and the same product can change coverage between production runs. Always use the figure on the box in front of you rather than a number from a website, because the box count is only as good as this input.

How do I measure an L-shaped room for flooring?

Split the L into two rectangles on paper, along the inside corner, then measure and calculate each rectangle separately and add the areas. Run this calculator once per rectangle, or work out the combined area and enter it as one rectangle with the waste allowance applied to the total. The one thing not to do is measure the L as a single big rectangle using its longest length and width, which counts the missing corner as floor and over-orders, sometimes by a quarter of the room.

Should boxes be calculated from the area before or after waste?

Always after waste. The waste allowance is real material you will cut, damage or set aside, so it has to be bought, and it only exists inside boxes. Dividing the bare area by the box coverage understates the count on every job: the 180 sq ft example room gives 9 boxes before waste and the correct 10 boxes after it. This calculator applies waste first and rounds the box count up from that total, in that order, on purpose.