A1C Calculator, A1C to Average Glucose Converter
Your lab report says 7.0%, but what does that mean as a day-to-day blood sugar number? This free A1C calculator translates between the two languages of diabetes care. Enter your A1C and it converts it to your estimated average glucose (eAG) in mg/dL and mmol/L, plus your HbA1c in IFCC mmol/mol, the units used outside the United States. Or work in reverse: enter the average glucose from your meter downloads or continuous glucose monitor and see the A1C it points to. Every conversion uses the ADAG study formula published in Diabetes Care in 2008, the same equation the American Diabetes Association uses on its own charts, and the full A1C conversion chart below shows every half-point from 5.0% to 12.0%. Your result also shows where your A1C sits against the ADA ranges for normal, prediabetes and diabetes. That context is general information, not a diagnosis: only your clinician can diagnose, and your personal A1C target is yours alone to set with them.
Last updated: November 14, 2026
Your result
General information only, not medical advice or a diagnosis. Conversions use the ADAG study formula published in Diabetes Care (2008). Talk to your clinician about your own A1C target.
Official source: American Diabetes Association — Understanding A1C
The formula
Estimated average glucose (eAG) in mg/dL = 28.7 x A1C (%) - 46.7 (ADAG study, Diabetes Care 2008)eAG in mmol/L = eAG in mg/dL / 18HbA1c in IFCC mmol/mol = (A1C (%) - 2.15) x 10.929Reverse: A1C (%) = (eAG in mg/dL + 46.7) / 28.7
A worked example
An A1C of 7.0% converts to an estimated average glucose of 28.7 x 7.0 - 46.7 = 154 mg/dL, which is 8.6 mmol/L, and to 53 mmol/mol in IFCC units. Run it backwards: an average glucose of 140 mg/dL gives (140 + 46.7) / 28.7 = 6.5%, right at the ADA diabetes threshold.
More about the A1C Calculator
How the A1C conversion works
A1C and average glucose describe the same thing in different units, but the bridge between them is empirical, not arithmetic. In the ADAG study, 507 people with type 1 diabetes, type 2 diabetes or no diabetes wore continuous glucose monitors and gave frequent fingerstick readings for three months while their A1C was measured repeatedly. Matching the two produced a straight line: estimated average glucose in mg/dL = 28.7 x A1C - 46.7, with a correlation strong enough that the American Diabetes Association adopted it for its patient charts.
Two things follow from that origin. First, the formula is the same one your clinic uses, so this calculator and your lab report will agree. Second, it is a line fitted through thousands of people, not a law of your personal biology: the study itself showed a spread around the line, which is why eAG is always labeled an estimate. The mmol/L figure is a pure unit change (mg/dL divided by 18, the standard glucose conversion), and the mmol/mol figure is the official IFCC conversion, (A1C - 2.15) x 10.929.
A1C conversion chart: percent, mmol/mol, mg/dL and mmol/L
Every cell below is computed with the formulas on this page and rounded the way the calculator rounds: eAG in mg/dL to a whole number, eAG in mmol/L to one decimal, and mmol/mol to a whole number. Read across from your lab A1C to see the average glucose it represents in both unit systems.
| A1C (%) | HbA1c (mmol/mol) | eAG (mg/dL) | eAG (mmol/L) |
|---|---|---|---|
| 5.0 | 31 | 97 | 5.4 |
| 5.5 | 37 | 111 | 6.2 |
| 6.0 | 42 | 125 | 7.0 |
| 6.5 | 48 | 140 | 7.8 |
| 7.0 | 53 | 154 | 8.6 |
| 7.5 | 58 | 169 | 9.4 |
| 8.0 | 64 | 183 | 10.2 |
| 8.5 | 69 | 197 | 11.0 |
| 9.0 | 75 | 212 | 11.8 |
| 9.5 | 80 | 226 | 12.6 |
| 10.0 | 86 | 240 | 13.4 |
| 10.5 | 91 | 255 | 14.1 |
| 11.0 | 97 | 269 | 14.9 |
| 11.5 | 102 | 283 | 15.7 |
| 12.0 | 108 | 298 | 16.5 |
Notice the step size: each 0.5% of A1C is worth about 14 mg/dL of average glucose, and each full 1.0% is worth about 29 mg/dL. That is why clinicians treat a half-point A1C drop as a real change, not a rounding wobble: going from 8.0% to 7.5% means your blood sugar averaged roughly 14 mg/dL lower across every hour of three months. It is also why small A1C differences near a threshold, 6.4% versus 6.5%, represent a tiny glucose difference even though the label changes.
The ADA ranges, and what they do and do not say
The American Diabetes Association publishes three reference ranges for A1C. They are screening and diagnostic reference points for adults, and this calculator uses them to place your result in context. They are general information, not a diagnosis, and they are not your personal target: pregnancy, age, other conditions and hypoglycemia risk all change what a clinician aims for.
| A1C | ADA reference range | eAG at the boundary |
|---|---|---|
| Below 5.7% | Normal range | Below 117 mg/dL (6.5 mmol/L) |
| 5.7% to 6.4% | Prediabetes range | 117 to 137 mg/dL (6.5 to 7.6 mmol/L) |
| 6.5% or higher | Diabetes range | 140 mg/dL (7.8 mmol/L) or higher |
A result in the diabetes range is normally confirmed with a second test on a different day before a diagnosis is made, unless symptoms and a high glucose reading already settle it. A result in the prediabetes range is a risk signal, not a disease: it identifies the group where lifestyle change, and sometimes medication, has been shown to delay or prevent type 2 diabetes. If your converted or measured A1C surprises you in either direction, the right next step is a conversation with your clinician, not a recalculation.
Why A1C and average glucose sometimes disagree
A1C is glucose history written into red blood cells, and anything that changes those cells changes the story. Red cells normally live about 120 days. If yours turn over faster, from recent blood loss, hemolysis, some anemias under treatment, or pregnancy, each cell has less time to collect sugar and A1C reads lower than your glucose would suggest. If turnover slows, for example with iron deficiency, A1C can read higher. Kidney disease, recent transfusion and certain hemoglobin variants can distort the test in either direction, and laboratories flag some of these cases automatically.
The sampling problem is just as common and much simpler. A meter average built from two fasting readings a day describes your fasting glucose, not your average: it misses the post-meal rises that A1C fully counts. A 90-day CGM average is the fairest comparison, and even then a gap of a few tenths of a percent from the lab is normal individual variation, not an error in either number.
Worked examples, step by step
A1C to glucose: your lab reports 7.0%. Multiply by 28.7 to get 200.9, subtract 46.7, and your estimated average glucose is 154 mg/dL. Divide by 18 for 8.6 mmol/L. For the IFCC figure, subtract 2.15 from 7.0 to get 4.85, then multiply by 10.929 for 53 mmol/mol.
Glucose to A1C: your CGM report shows a 90-day average of 140 mg/dL. Add 46.7 to get 186.7, divide by 28.7, and the implied A1C is 6.5%. Run the same arithmetic on 111 mg/dL and you get 5.5%, which matches the chart row in reverse and is a good self-check that you have the formula the right way round.
Reading a foreign lab report: a report from London shows HbA1c of 53 mmol/mol. That is the IFCC figure for 7.0%, the same result an American lab would print as A1C 7.0% with an eAG of 154 mg/dL. The two systems describe one test; nothing about your blood changes at the border.
Common mistakes when converting A1C
The most damaging mistake is feeding a single reading into the reverse conversion. A fasting glucose of 110 mg/dL does not imply an A1C of 5.9% in any useful sense, because A1C counts the meals, nights and weekends that one reading never saw. Only convert averages, and the longer the averaging window, the better.
The second mistake is mixing the two glucose unit systems. The factor between mg/dL and mmol/L is 18, so 8.6 mmol/L and 154 mg/dL are the same blood sugar, while 154 mmol/L would be incompatible with life. If a converted number looks impossible, check the unit before you panic.
The third is treating eAG as a measurement. It is a translation of A1C through a population formula. When your own long-run CGM average and the eAG disagree by 10 to 20 mg/dL, believe the combination, not either number alone, and raise it at your next appointment: persistent gaps are one of the clues that something else, such as anemia, is bending the A1C itself.
How to use the A1C Calculator
- Choose your starting point: "I know my A1C" or "I know my average glucose".
- If you know your A1C, enter the percentage from your lab report, for example 6.5.
- If you know your average glucose, enter the average (not a single reading) and pick mg/dL or mmol/L.
- Hit Calculate to see your A1C, your estimated average glucose in both units, your IFCC mmol/mol, and where the result sits against the ADA ranges.
Frequently asked questions
What is A1C?
A1C, also called HbA1c or hemoglobin A1C, is a blood test that shows your average blood sugar over roughly the past 2 to 3 months. Sugar in your blood sticks to hemoglobin inside red blood cells, and because those cells live about three months, the percentage of hemoglobin carrying sugar reflects your longer-term average rather than a single moment. Results are reported as a percentage in the United States (NGSP units) and as mmol/mol in IFCC units used in many other countries.
How do you convert A1C to average blood glucose?
Use the ADAG formula: eAG in mg/dL = 28.7 x A1C - 46.7. So an A1C of 7.0% gives 28.7 x 7.0 - 46.7 = 154 mg/dL. Divide by 18 for mmol/L (154 / 18 = 8.6 mmol/L). The formula comes from the A1C-Derived Average Glucose (ADAG) study, published in Diabetes Care in 2008, which matched A1C results against thousands of continuous and frequent glucose readings.
What is a normal A1C?
Under the American Diabetes Association ranges, an A1C below 5.7% is in the normal range, 5.7% to 6.4% is the prediabetes range, and 6.5% or higher is the diabetes range. These are general reference ranges, not a diagnosis: a diagnosis also depends on repeat testing and your clinical picture, and many people with diabetes are given a personal target, often below 7.0%, that differs from these cutoffs.
How do I convert A1C percent to mmol/mol?
Use the IFCC conversion: mmol/mol = (A1C % - 2.15) x 10.929. An A1C of 7.0% becomes (7.0 - 2.15) x 10.929 = 53 mmol/mol, and 6.5% becomes 48 mmol/mol. The United States reports A1C as a percentage (NGSP), while the UK, Europe and many other countries report the same test in mmol/mol (IFCC), so this conversion lets you read a lab report from either system.
Why does my meter average not match my A1C?
Three common reasons. First, most meters and apps average only the readings you take, which cluster around mealtimes and miss overnight lows and post-meal peaks, while A1C reflects all hours. Second, the ADAG formula is a population average: individual red blood cell lifespans vary, so two people with the same true average glucose can differ by several tenths of a percent. Third, conditions that change red blood cell turnover, such as anemia, recent blood loss or transfusion, pregnancy, or some hemoglobin variants, can push A1C up or down independently of glucose. A CGM average over 90 days usually tracks A1C more closely than fingerstick averages.
Is estimated average glucose the same as my actual average glucose?
No, it is an estimate derived from your A1C, not a measurement of your glucose. The ADAG relationship is strong at group level but has a real spread for individuals, so your true average can sit noticeably above or below the eAG figure. Treat eAG as the best single translation of an A1C into glucose units, and treat a long CGM record as the better source when the two disagree.
Can I convert a single glucose reading to A1C?
Not meaningfully. A1C reflects an average over 2 to 3 months, so one reading, even a fasting one, cannot be converted into an A1C. The reverse mode of this calculator expects an average glucose, ideally 60 to 90 days of CGM data or a large set of meter readings spread across the day. Entering a single reading produces a number, but it will not predict your lab A1C.
How often should A1C be tested?
The ADA suggests testing at least twice a year for people with diabetes who are meeting their targets, and quarterly when therapy has changed or targets are not being met. For people without diabetes, testing intervals depend on risk factors and prior results. Because A1C reflects about three months of glucose, testing more often than every 8 to 12 weeks adds little information. Ask your clinician what schedule fits you.
Does A1C testing require fasting?
No, an A1C test does not require fasting. Because it reflects glucose attached to hemoglobin over about two to three months, a single meal, drink, or short-term stress does not change the result in the way it can change a fingerstick reading. You can have the blood draw at any time of day, though your clinician may order other tests at the same visit that do require fasting.
What factors can affect A1C test results?
Several conditions can make A1C higher or lower than your true average glucose. Recent blood loss, a transfusion, iron-deficiency anemia, kidney or liver disease, pregnancy, and some inherited hemoglobin variants can change red blood cell lifespan or the test itself. If your A1C does not match your meter or sensor readings, mention these factors to your clinician, who may confirm the result with another test.
What is the difference between eAG and GMI?
eAG and GMI both translate between A1C and average glucose, but they start from opposite sides. eAG converts a laboratory A1C result into mg/dL or mmol/L using the ADAG formula. GMI estimates what A1C might be from continuous glucose monitor data over about 14 days. Because the time windows and formulas differ, eAG and GMI for the same person often do not match exactly.